Carbon Dioxide Emissions Simplified
By Roger Pielke, Jr.
Posted on Mar. 09, 2009
Ed. note: This piece also appears today on Roger Pielke Jr.'s science policy blog, Prometheus.The mathematics of United States carbon dioxide emissions are not actually that complicated. The figure below from the U.S. Energy Information Agency shows that the 5,991 million metric tonnes (MMt) of carbon dioxide emitted by the U.S. came from 3 sources: coal, natural gas, and petroleum (click here to see the graph). Each of these fossil fuels, plus renewables and nuclear power make up the total energy consumption in the United States. Energy consumption is measured using a unit call a “quad” which means a quadrillion BTUs. In 2007 the United States used 101.4 quads of energy (data). This amount of energy can be broken down by source (click here to see the graph). The 15.2 quads of energy from nuclear and renewable sources resulted in negligible carbon dioxide emissions. The amount of carbon dioxide emitted due to each quad of fossil fuel energy depends upon the source, as their carbon intensities differ. For the analysis that follows I use the following values, distilled from the EIA information provided here. Coal = 94 MMt Carbon Dioxide per Quad Natural Gas = 53 MMt Carbon Dioxide per Quad Petroleum = 65 MMt Carbon Dioxide per Quad Thus, to calculate total U.S. carbon dioxide emissions simply requires multiplying quads of energy by carbon dioxide per quad and summing across the three fuels. This simple math results in the following: (94 * 22.8 [Coal]) + (53 * 23.6 [Natural Gas]) + (65 * 39.8 [Petroleum]) = 5,981 MMt carbon dioxide This total compares quite well with the total of 5,991 MMt carbon dioxide reported for 2007 by EIA (see figure above). We can use this information to ask some straightforward questions about how an emissions reduction target of 14 percent below 2005 levels (5,095 MMt carbon dioxide) might be reached by 2020. We can do a bit of hypothetical “stress testing” of these numbers, by asking, in theory, what sort of actions might lead to reaching the emissions reductions target. Before we do this, we do need to make a guess as to 2020 US energy consumption. The EIA projects that energy consumption will grow at a rate of 0.5 percent per year. Because GDP growth is expected to be higher than this rate, it already builds in an assumption of gains in energy efficiency. But let’s use the EIA estimate, which suggests that US energy consumption in 2020 will be 108.6 quads, of which 21 quads will come from renewables plus nuclear energy, representing a growth of about 40 percent on top of 2007 values. This leaves 87.2 quads to be produced by fossil fuels. Here are a few examples of the effects of different hypothetical strategies: 1) What would happen if all coal consumption were to be replaced with natural gas? Answer: In 2020 total emissions would be 5,110 MMt carbon dioxide, very close to the 2020 target. 2) By how much would renewables plus nuclear have to displace coal to reach the target? Answer: The target could be reached if coal consumption were reduced by about 42 percent, and the displaced 9.2 quads of energy were replaced by renewables plus nuclear, implying more than doubling of renewable plus nuclear energy supply, to comprise 30 percent of all energy consumption. If renewables alone (i.e., non-nuclear) are to carry the weight of displacing coal, then they would have to increase their role in consumption by a factor of 4.7 over 2007 values. If growth in renewable energy supply is restricted to solar and wind only, then these sources would have to increase their role in consumption by a factor of 80 (that is, e-i-g-h-t-y). The reason for this big difference is that biomass and geothermal provided about 6.4 quads of energy in 2007, whereas wind and solar only 0.4 quads. The Obama Administration’s goal of doubling wind, solar, and biofuels production within 3 years may indeed be a worthwhile policy, but it is not consistent with a goal of displacing sufficient coal to reach the 14 percent 2020 target using wind and solar (and while biofuels have their own complexities as a policy issue, they are not really a substitute for coal in any case). 3) By how much would energy consumption have to be reduced to meet the target assuming no changes in the energy consumption mix? Answer: Energy consumption would have to be about 85.5 quads in 2020, about equal to 1992 values when the US economy was 35 percent smaller than in 2007. Some Comments on the Stress Tests First, number (1) above is really not desirable if the goal of mitigation policy is ultimately a reduction in emission of 80 percent or more. The reason for this is that while natural gas is less carbon intensive than goal, it is still carbon intensive. Locking in a large natural gas infrastructure is not compatible with large emissions reductions. Consider that in the hypothetical case that all US fossil fuel needs were to be met by natural gas, then 2007 carbon dioxide emission would have been 5,375 MMt, less than observed in 2007, but not consistent with any low stabilization target. Second, number (2) is theoretically promising but practically daunting. The following is worth repeating — for wind and solar to displace enough coal to reach the 14 percent target by 2020 would require that it increase by a factor of 80 in absolute terms from 2007 production. President Obama’s policy of a tripling in wind and solar energy supply in the next three years would leave a need for another increase by a factor of about 25 over the next 8 years if wind and solar are to displace sufficent coal to meet the target. Third, with respect to number (3), while there is a lot of potential to exploit in increasing energy efficiency, to reach the 14 percent would require a reduction of US energy use by about 2 quads per year for the next decade. Assuming that policy makers and citizens want economic growth to resume, this is a Herculean task. If you factor in that the EIA estimates to 2020 already include a good bit of efficiency gain in the BAU scenario, the task could be even larger if these assumed gains do not occur or if economic growth happens at a faster rate than assumed. In reality, of course, none of these “stress tests” would be applied alone; there would be a combination of all three approaches discussed above. However, I challenge readers to present a scenario combining decarbonization of the energy supply and efficiency gain that has a realistic chance of succeeding in meeting a 14 percent emissions reduction (below 2005) by 2020. I am not saying that it can’t be done, but I am saying that I don’t see how it can be done. The comments are open, have at it. Setting an emissions target and timetable, allocating emissions permits, and then saying that the magic of the market will efficiently take care of the task is exactly the answer I’d expect if one doesn’t have an answer. Markets can’t make the impossible possible, and when they are used in such a manner, often have undesirable results. The original article can be viewed here.
|